My hp g6 pavilion model number g6-1d93ca wont turn on,no wireless light ,no charge light

need some help, my hp pavilion g6 sereis wont turn on,no wireless light, no charge light.laptop not functioning.
can some one help.. last time when i used my laptop,wireless light is sawing orage light, battery life is 50% and i shut it down. next time when i try to turn it on, it wont turn on at all.

Hello @geeny6964,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer is not able to power on, and I would be happy to assist you in this matter!
To power your computer back on, I recommend following the steps in this document on Computer Does not Start (Windows 7, Vista, XP).
If the issue persists after following all of the troubleshooting steps in the document above, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

HT4061 what to do if don't have serial number because ipad wont turn on

I have an Ipad3. The first IPad3 I had I kept having problems with so they switched it out. Tonight I did the software update on it. It went out and never came back on. I can't get it to turn back on so therefor I can not see the serial number. Can some one help me please.
Thank you

Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Can't find model number

So I have a satellite and it won't turn on and I think the power port is broken so it won't turn on and the sticker on the bottom had worn off so I can't find the model number and can't turn it on to get it from the bios. I only have the battery model number. Trying to find the power port to order it but can't. Any help would be great. Thank you.
Battery#pa3817u-1brs

Satellite L500 (PSLU6U-00W008)
Some like that are special order or made for a big-box store chain. Compare it with this spec.
Satellite L500-ST2544 (PSLU6U-00M008)
Because they are in the same part-number family (PSLU6U, the downloads here should work just fine.
-Jerry

How can i check for my model number of g6 pavilion?

i can not identify my laptop, i need to download drivers from hp.com
i have downloaded the hp assistance software as well and it show the model number which is
serial number:[Personal Information Removed]
and
product number:LN246EA#A2N
i have searched a lot but could not find any drivers
i need audio driver because if i play dvd the sound is very low and distorted.
i have searched on hp.com by the auto detect of the product but it can not detect my laptop
its a g6 pavilion
it shows a lot of model numbers list when i go to the web site and i dont know what is my laptops number because its different from the number which is shown by hp assistance software.
please help me out. thanks. or just send me the link of from where i can get the drivers to solve this problem. regards.
asim nawaz.
[email protected]

Pavilion g6-1007sx
This should be the driver page:
Driver Page

Find my HP Pavilion Slimline model number

how do i find my HP Pavilion Slimline model number - when i enter the one on the label it asks if it was purchased in another country. I'm need to update some programs and this is very frustrating

Mariaq, welcome to the forum.
Here is a guide to help you identify your computer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07555&lc=en&cc=us&dlc=en
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Pavilion g6s model number

I ordered a customized g6s from the HP website; how do I find the exact model number so I know which BIOS update to get? Windows and the HP Support Assistant just see it as a "HP Pavilion G6 Notebook PC."
This question was solved.
View Solution.

Hi,
Tap away at f10 as you start the notebook to enter the bios menu. Here you should see full deatils regarding the Model No. Part No. etc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Whats the motherboard model number for hp pavilion notebook i3 15-n037cl

So I had gotten an error 90b fan error and it was freezing up on some video games , it was still under warranty but I did not want to part with it for weeks and attemted to clean it myself , I have since ripped the power button ribbon clamp out of the motherboard and it will not power up, My first question is this will not be covered will it?
My next question would be how would you recommend I rectify this error , what is the model number of the motherboard so I can get a replacement? and where can I find some directions on swapping the cpu and attaching what needs to be attached, thanks.
This question was solved.
View Solution.

Yes. It is an i3-3217U with integrated Intel graphics
So this is the motherboard:
Intel Core i3-3217U DC 1.8-GHz (3 MB L3 Cache, 1600MHz DDR3, 17 W) for use with Windows Standard. 737982-501
Also not in stock at Partsurfer.

Need model number

need model number for hp pavilion touchsmart 15 selectbook.
the sticker is gone.

Hi,
Shut down the notebook. Tap away at the esc key as soon as you start the notebook to enter the Start-up Menu, then select f10 to enter the Bios Menu - you should find the Model No./Product No. listed on the first tab.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Drivers for HP Pavilion model no: p6-2302eam.

I have a new HP Pavilion (model no: p6-2302eam.) Cannot for the life of me find the list of drivers for this PC via HP uk website. I have searched the via the product number (C3T77EA#ABU) and above model number ot no avail.
Closest I can find is HP Pavilion p6-2310ea Desktop PC › Is this the same?
Cheers
John

No support page update for the p6-2303ea/eam yet. Did go live on the HP Part Surfer... C3T77EA / HP PAVILION P6-2302EAM BNDL PC UK and the motherboard is a HP customized Foxconn H-Joshua-H61-uATX (Joshua).
Chipset is Intel H61
Integrated Graphics Chip is Intel
Integrated RTL8171FH-CG LAN is Realtek
Integrated 92HD73E Audio is IDT
USB 3.0 may be Texas Instruments
You may be able to use the HP s5-1224 Windows 7 Drivers on your computer as it uses the same Joshua-H61 motherboard as your computer.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Help me Identify my Model number of Satellite P500

Hi To All,
            Guys I have bought a new toshiba satellite laptop P500 Series. I am having hard time to identify it's complete model number. I have search the internet all over but still haven't found any luck in identifying it. Could anyone please help me in this situation.
Model : Satellite P500
Part number : PSPG8U-08F02CB       Operating System : Windows 7 home premium 64bit
I would be very thankful for anybodys help. Thanks in advance.

Thanks a lot for replying. I have everything. I have even made my recovery DVD's. I got it from Dubai. I just wanted to know the specs through it's model number in a bit more detail.
When I bought it even then only it said P500. Just out of curiosity I wanted to ask that can I install a 2nd HDD ??? There is a compartment below I saw....
I wanted to ask also that I hear a sound below the left speaker like if the wings of the fan are touching something !! The sound is barely there but when it is turned on it's audible for 2 secs a bit loud than becomes quite but still is there if listened very very carefully. Just wanted to ask is it something alarming or I should just forget it. Because I love it as it is performing awesomely. No problems what so ever. It runs smoothly. I even updated the BIOS. Although I read in the forums many complaints of people about the P500 & also about the BIOS problem that occured after the update from toshiba service station. Thanks to God my laptop is working smoothly.
I think that the some of the P500's very faulty machinery or hardware or software problems. Just my opinion though. Hope to reading your reply soon. Thanks

Where to find Model Number on Dell Venue Pro 11

I am trying to figure out if my tablet will support dual monitors but I need to find the model number (box was thrown away long time ago). Where can I find the model number?

Do you mean the model number or the serial number? Both are available in the "More Info" link within "About This Mac" (on the first tab, "Hardware"). You can also find the serial number under your battery.
Matt

I need to get a new hard drive for my 13" mid-2009 MBP but the model number is worn off. Is there a place to find this?

My hard drive needs to be replaced and I am looking to do it myself. However, I am in need of the model number of my MacBook Pro. The issue with this is, it has been worn off. My MacBook Pro is a 13" Mid-2009 model.
Thanks!

Any 2.5"dia, 9.5mm thick SATA HDD will be compatible. Look at options here:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
This video will show you how to install it:
http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Ciao.

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Satellite Pro A300D - What is the model number for the keyboard?

My husband managed to dislodge a keycap on my keyboard, and broke the white scissor clip that holds hit on...(don't ask me how)
He spoke to the authorised service centre here in Norway, and they sent us replacement scissor clips (actually they sent an old non-functioning keyboard) but the clips are of a different design to the ones on my laptop.
I was wondering if anyone has an idea of the model/serial number of the keyboard used in the Satellite Pro A300D-151 (PSAK9E) so I can get the correct replacement part.
I really don't want to have to replace the whole keyboard when it's just 1 of the scissor clips that is broken...the laptop is only 5 months old.
Here are some photos of the scissor clip in question & the where it attaches to the keyboard (sorry about the quality)
Link:[http://img31.imageshack.us/gal.php?g=1000683o.jpg]
Thanks
notsure

Hi
Sorry buddy but its not possible to exchange some single keys on a keyboard so in this case you must replace the complete keyboard. But normally this should not be so difficult.
Either you exchange the keyboard yourself or you sent the notebook to the authorized service provider.
The model number for the keyboard is not known to me but contact your ASP!! They can order all Toshiba parts and they should know the right part number.
Bye

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Scorpio 500 GB. When i tried to install the MAC OS, it identies a hard drive with 3.6 TB and i'm not able to do the installation.

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Blue Scorpio 500 GB. When i tried to install the MAC OS, it identifies a hard drive with 3.6 TB and i'm not able to do the installation. I touhgt the new ard drive was bad but i was able to install windows XP. Any ideas what do i have to do?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

My hp g6 pavilion model number g6-1d93ca wont turn on,no wireless light ,no charge light

Similar Messages

Maybe you are looking for