ATA185 and device pool

Hello every one. I hope you are well. I have an problem that i successfully ass 2 ports of ATA186 as sccp to CUCM 6. all things go well but when I assign device pool for extension of ATA that different from device pool assign to ip Phones, ata186 can not call ip phones and vice versa.
this sample of my voice netwoek . when ext 2003 call ext 200l the call failed because they have different device pool but if I assign for these number same device pool the call processed successfully .....
Pleade I need any details about this problem ..... Thx

thanks jaime for your reply ... when I assign same region for two device pool, the call will complet .
but if the 2 device pool have different region the call will failed.. I can not get any explanation for this ..

Similar Messages

Device Pool Configuration

Hello There,
I have a 4.1(3) CCM environment. One Pub and one Sub located in Boston. We just opened another brach in NYC. I configured a new CCM Group, Region and Device Pool (DP). I configured the new Gatewat (Cisco 1760 router) with the new DP but as soon as I assign the new DP to the phones in NYC, the users can not make outbound calls (Fast busy). This probably is an issue with CSS and Partition configuration but I can't figur it out what exactly is the issue. Coule someone please help?
Thanks,
BT

You are on the right track, Device Pool does not control the call path, however it can infulance it by codec selection. Make sure that you create new Route Group pointing to this GW, new Route List pointing to the RG, and new Route Pattern pointing to the RL, assign a new parition to this RPs, such as NY-911-PT, NY-Local-PT, NY-LD-PT, NY-INT-PT. Lastly create new CSSes and include the paritions and assing this CSS to the phones. If your other sites are configured properly you should be able to mimic the environment.
HTH,
Chris

Lync 2013 Enterprise load balancing on the front end and edge pool

Hi,
I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers). I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers. I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
balance my front end pool. I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
Can someone clarify the front end requirement?
Also - looking now at the edge pool - this site again have two edge servers in a pool. We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com). These will be
NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443. I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
Persevere, Persevere, Per..

That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
The description on the calculation tool also describes this correctly:
Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
Lync web services)
You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices. Both are applicable for the Front-End so you have either
full HLB for both SIP and HTTP(S) traffic
DNS LB for SIP traffic and HLB for HTTP(S) traffic
Hope this is more clear :-)
Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

CUCM Device Pool

Hello,
i have 2 sites HO and DR, CUCM is setup in distributed call processing as one cluster, HO phones in HO device pool and DR phones in DR device pool. everything is perfect when the users are on their desk phones dialing to PSTN according to their CSS
Question:
when HO users travel to DR and when they login in EM, they will get their profile & privileges of CSS and they will be able to reach PSTN ?? becz DR phones device pool, line css,locations,are different, do all these will affect HO user profile.

Clark,
The Device Pool contains a lot of resources and settings that get applied to devices. What exactly are you trying to do or what questions do you have? Do you not want the HO users to use the HO VG when they're at DR? If so, you can configure Physical Locations and Device Mobility. So that when the users from HO are in DR, they would use the CSS of the site, which would route the calls out the DR VG.
Device Mobility
This chapter provides information about device mobility, which allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location. Cisco Unified Communications Manager uses the device IP subnets to determine the exact location of the phone. By enabling device mobility within a cluster, mobile users can roam from one site to another and acquire the site-specific settings. Cisco Unified Communications Manager then uses these dynamically allocated settings for call routing, codec section, media resource selection, and so forth.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_010111.html
HTH
Regards,
Yosh

Logical Partitioning/Geolocation and Device Mobility

Hello,
I have a customer with a CUCM 8.6 cluster that supports a number of countries including India.
They have the Logical Partitioing feature enabled to make the system comply with Indian regulations for telecoms that forbid toll bypass etc.
They have now started using Jabber for Windows and have a number of users who are based in India but often travel to other countries.
When they do this they are not allowed to use voice gateways in the country they are visiting to place calls because of the geolocation configuration applied to their Jabber CSF device.
In CUCM 8.6 the geolocation seems fixed to the device (or device pool) and cannot be updated using the Device Mobility feature.
Is this feature supported/roadmapped for any later versions of CUCM? (or is there a reason why this would not be possible?)

radionecrotic wrote:
Has this always been the case for you or did you update recently and it started happening? There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting. See http://bbs.archlinux.org/viewtopic.php? … 47#p659347. I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all. I don't run anything that uses OpenGL so I don't know if it'll address your issue.
You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/

Location Device Pool Setting or Phone Location Setting

Hi all,
We create a device Pool Hamburg and Set the Location to a configured Location Hamburg. We add a Phone and assinge the Device Pool Hamburg to the new Phone. On the Phone itself is a default Location Setting hub None. Have we Set also here the Location Hamburg ?
Thx Joerg
Sent from Cisco Technical Support iPad App

Hi,
your are both right. In additional i foun in the forum also the information how to check the bandwith use via rtmt.
RTMT go to System --> Performance ---> Select the server---> Cisco Locations ---> Choose the locations you want ---> Bandwidth Available
Thx for help

Unable to initialize capture device and device control in HDV

I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
Im at my wits end, Ive been working on this for a whole week now.
Thank you,
Bugs

It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
x
To do a full quicktime reinstall.
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
If this doesn't work, then the problem lies elsewhere:
1. your system - user preferences, firewire ports or other system elements.
2. your equipment - camera/deck/firewire cables.
3. your process - not setting up the software properly or using the software erroneously.
Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
Troubleshooting Steps for OS X
by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
FIRST AID
01 Completely shutdown, wait a 5 minutes, restart
02 Make sure you're not running out of free space on the System volume
03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
04 Repair permissions using Disk Utility
05 Create a new user account, and see if the problem persists there
06 Clear system & user caches
07 Run FCP Rescue
08 Unplug all USB, Firewire devices except Apple mouse
09 Startup in SafeBoot mode, and see if the problem persists there
10 Reset system firmware
MORE SERIOUS TROUBLESHOOTING
11 Reapply the latest combo updater
12 Run the Apple hardware diagnostic CD
13 Check the hard drive for bad blocks
14 Take out 3rd party RAM
15 Unplug 3rd Party PCI cards
16 Reset PMU
17 Archive and reinstall the OS
18 Reinstall the system from scratch
19 Send the machine back to Apple

Photoshop CC closes or freezes when saving in save for web and devices

Hello,
Since I have a new laptop with Windows 8, I couldn't get Photoshop CS6 anymore, so I downloaded PS CC.
It's working great the last days, but since yesterday PS freezes or closes everytime I try to save a .gif in save for web and devices.
It drives me insane...
I hope someone can help me.
Thanks in advance.

Trash the Save for Web prefs in the respective folder (C:\Progrom Files\Common Files\Adobe or your user home directory).
Mylenium

Questions on managing iTunes content and devices?

I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
Creating a consistent storage location on a NAS
My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
Home Sharing
What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
Syncing devices from multiple computers
One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
iCloud Questions
I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.

I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
Creating a consistent storage location on a NAS
My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
Home Sharing
What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
Syncing devices from multiple computers
One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
iCloud Questions
I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.

How can I share my schedule information with my wife on her accounts and devices?

My wife and I have separate accounts in our MacMini and MacBook. We each have an iPhone. She uses GMail. I use Mac Mail. How can I share my schedule information with my wife on her accounts and devices?

It is not advisable to follow the above suggested method. The following will do what you want without complications.
1. On your Mac, go to http://help.apple.com/icloud/#mm6b1a9479 and follow the instructions to share a calendar privately. If you have more than one calendar you want to share you will have to do each individually. You can choose whether she is able to edit it or whether it should be read-only.
2. If your wife does not have an iCloud account she will need to obtain one. When you share a calendar and nominate her to access it she will receive and email. All she has to do is to open the email and click 'Join Calendar'. This will add the calendar to her Calendar app on all devices and on icloud.com without affecting any other data. Again, this will have to be done individually if more than one calendar is involved.

How do i manage multiple users and devices with one apple id without everything showing up on every device?

how do i manage multiple users and devices with one apple id without everything showing up on every device?

How to use multiple iPhone, iPad, or iPod devices with one computer

TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any an

iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?

Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart.

Can I use 1 computer with 2 different iTunes accounts and devices? We're afraid we're going to wipeout one library or the other if we do??

My son got an iPhone and wanted his own iTunes account. Now his computer died, and he wants to connect to his iTunes account on my computer. When it asks to sync the computer, a message comes up and we're afraid either his or my library are going to be wiped out by trying to do this. Is it possible to use 1 computer with 2 different iTunes accounts and devices without wiping out one of the libraries? Thanks for any info.

If the content was not originally purchased/synced to the device from your computer it will erase and replace the content from the device with that of the computer. If you have content that you want to backup you can transfer purchases http://support.apple.com/kb/ht1848 check this link out

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

How to remove my brother's contacts from my iCloud and devices?

So my brother a couple of weeks ago had an issue with his Iphone 4s so he did a factory restore from my macbook and some how all his contacts are now in my machine and devices. How do I go about correcting the issue and utimately get rid of them? Any idea as to the best way?

You can only delete the one's you don't want manually. However before deleting anything you need to make sure that neither of you are still logged into the other one's account.

ATA185 and device pool

Similar Messages

Maybe you are looking for